Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

Schaeffler replaces main Trunnion Bearings on BOS Plant Vessels at Tata Steel Port Talbot

Schaeffler UK was part of the team that successfully completed the replacement of the main trunnion bearings on a BOS (Basic Oxygen Steelmaking) plant at Tata Steel Port Talbot.

Schaeffler TaTa


By replacing the drive-side trunnion bearings with split rolling bearings, Schaeffler also helped to save the customer five extra days of work. If solid rather than split bearings had been used, the customer would have had to disassemble the bull gear unit (i.e. the main drive unit for the BOS plant vessel).

TATA Steel Port Talbot has two BOS Steel making vessels (V1 & V2) in operation. The original vessel was installed in the late 1960s by UK company Ashmore, Benson, Pease & Co and was subsequently upgraded in 1991/1992 by Mannesmann Demag, including trunnion bearing replacements. Each vessel has a steel making capacity of 330 tonnes. Loss of operation of a BOS vessel would result in significant lost revenue for Tata Steel.

Simon Life, BOS Plant Departmental Engineer at Tata Steel Port Talbot comments: “The bearing replacement work was very successful. The bearings were fitted to a high standard with expertise provided by Schaeffler throughout the installation process. During the bearing changeover, we encountered several problems with components being damaged and jacking issues. However, all problems were discussed with Tata, Schaeffler engineers and Central Engineering support, and between all parties, solutions were generated, action lists compiled and remedies implemented. Without Schaeffler’s expertise, the bearing change would not have run so smoothly.”

In July 2011, Schaeffler UK received a telephone call from an area works engineer at the BOS Plant, advising of a sudden bearing failure on the non-drive side (NDS) of the V2 BOS plant vessel.

The BOS Plant engineers arranged a meeting and a request was made for two engineers from Schaeffler Germany to be on site at Port Talbot soon afterwards. A meeting subsequently took place at Port Talbot to discuss action plans and how to replace the trunnion bearings.

As Dave Wall, Senior Applications Engineer at Schaeffler UK recalls: “A method statement document was drawn up by Schaeffler UK, which specified the sequence and method to replace the bearings and outline the TATA requirements. Included in this document was a detailed tooling list and a step-by-step procedure for the dismounting and mounting of the drive-side (DS) & non drive-side (NDS) bearings.”

“The standard ‘solid’ bearing on the DS was replaced by a special FAG split spherical roller bearing [SSRB], which is the recommended replacement spare, as this reduces the amount of downtime when installing the replacement bearing. The NDS bearing was to be replaced with a similar solid bearing. In addition, various surrounding components also required replacing, once the secondary damage caused by the bearing failure had been identified,” confirmed Wall.

Removal of the Drive Side bearing

The cutting away of the existing bearing took a total of 36 hours. The distance between the trunnion spacers (bearing seating width) was measured in order to determine the thickness required for two special, TATA designed, split ‘dovetail’ spacers. These were required to ensure that the new split bearing would be correctly secured in place.

The new split SRB inner ring halves with clamping rings, outer ring half and bottom roller cage halves, were fitted without any problems.

Removal of the Non-Drive Side bearing

The original bearing on the NDS had failed during operation, which had caused the BOS converter to drop down. It was now resting on the bearing housing and the housing covers.

Scheaffler TATA

After lifting, parts of the damaged bearings were removed, including cage pieces; outer and inner ring fragments and rolling elements. All the components were sent for forensic examination to TATA Central Engineering Metallurgy & Inspection Dept. The housing back cover, bearing pressure plate and sleeve spacer were found to be seriously damaged. New ones had to be urgently manufactured by Tata Steel’s Central Engineering Shops (CES). The bearing inner ring had disintegrated and the sleeve had to be cut off due to its deformed shape. After removing the damaged bearing, it was also discovered that the trunnion back spacer was in need of repair. Again, machining work was urgently carried out by CES.

Due to the subsequent damage to the bearing housing, Schaeffler expertise was required to manually repair this surface to restore it back to an acceptable condition.

During the dismounting process the NDS Ladder Expansion Bearing Rollers had to be replaced. To facilitate the Ladder Roller replacement and installation of a TATA manufactured solid inner bearing housing cover, the bottom half of the housing had to be moved away from the journal using specially manufactured crossbeams.

Mounting of the new Non-Drive Side bearing

The new bearing was first pre-mounted to determine the correct sleeve spacer width. The bottom half of the housing was then moved back into position and the crossbeam construction removed.

Mounting of the new bearing was challenging, as the collapse of the original bearing had caused the vessel to move out of alignment.

The lowering of the converter was also a challenge as the vessel had to be moved sideways by 40mm to achieve the correct installation position. Side shifting was initially a problem for the vessel lifting contractor but the problem was successfully overcome.

Final mounting steps for the NDS and DS bearings

For the DS bearing, the remaining roller cage and outer ring halves were installed. For both bearings, the housing caps were fitted and each bearing was 100 per cent filled with grease, including the surrounding free space.

The housing covers were bolted in position and new seals with their tensioning devices were fitted. After having successfully completed the work in under 2 weeks, Schaeffler engineers were pleased to be leaving behind a very happy customer.

After the bearings were installed, the work didn’t finish there. Schaeffler UK prepared a recommended practical maintenance schedule list and forwarded this to the BOS Engineers, which was well received. In addition, customer “as built” cross-sectional drawings were updated to show the actual parts (with measurements) now in place at V2. Schaeffler UK participated and contributed to the Bearing Failure Review meetings with Tata Steel that followed the bearing replacement for the BOS vessels.

“Since replacing the trunnion bearings, engineers from Schaeffler UK have also supervised two further BOS vessel bearing changes in a very short timeframe of just two months: Converter C at SSI UK / Teesside and Converter 1 at Tata Steel Port Talbot. Schaeffler has now been selected as the preferred supplier of main trunnion bearings for the two BOS plant vessels at Tata Steel Port Talbot,” confirms Dave Wall.

For more information, please call the Schaeffler UK Marketing Department on 0121 313 5870. Alternatively, email info.uk@schaeffler.com.

 

source: Schaeffler

0 comments

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

Mineral Circles Bearings take on South Africa in 2017 with top Korean wheel bearing manufacturer ILJIN

Mineral Circles Bearings take on South Africa in 2017 with top Korean wheel bearing manufacturer ILJIN(0)

Dubai, UAE— Accessibility, OEM and aftermarket business. These are the core competence of South Africa as it continues to be the continent’s automotive manufacturing and bearings trade powerhouse. Based on the May 2017 report of the National Association of Automobile Manufacturers of South Africa (NAAMSA), the country produced last year a total of 600,007 units

Mineral Circles Bearings Announces Its Participation at Automechanika Johannesburg 2017

Mineral Circles Bearings Announces Its Participation at Automechanika Johannesburg 2017(0)

Join MCB at hall 5, stand 5G60 and experience Automechanika Johannesburg at its finest! DUBAI, United Arab Emirates, August 2, 2017—Mineral Circles Bearings (MCB), one of Middle East and Africa’s trusted bearing distributors and manufacturers, announces its first ever participation in Automechanika Johannesburg, Africa’s premier automotive trade show, on the 27th – 30th of September 2017 at the JHB Expo

CRAFT Bearings – the new main partner of Antanas Juknevičius’ Dakar team

CRAFT Bearings – the new main partner of Antanas Juknevičius’ Dakar team(0)

  The Lithuanian team of Antanas Juknevičius and Darius Vaičiulis, which is going to compete in the 2017 Dakar during January 2017, made an agreement with its main partner and will have a new name – CRAFT Bearings CRAFT Bearings, an international company established by Lithuanians, is a manufacturer of automotive and industrial bearings with operations

ZKL launched Cylindrical Roller bearing PLC_412-63

ZKL launched Cylindrical Roller bearing PLC_412-63(0)

Employees of ZKL successfully finished development and production of a large dimensional cylindrical roller bearing PLC_412-63 for important foreign customer. For a better imagine, here are the basic parameters: Outer diameter: 900 mm Height: 210 mm Weight: 612 kg Finishing operations turning and grinding of components were made on modern machines, which were obtained with

Roller bearings for the High Roller

Roller bearings for the High Roller(0)

The American Bridge Company has contracted SKF to supply technological solutions for the Las Vegas High Roller, soon to be the world’s tallest Ferris wheel. SKF is providing Caesars Entertainment Corporation’s 170-metre-tall Ferris wheel with two custom-designed spherical roller bearings along with related technologies. The two spherical roller bearings weigh approximately 8.8 tonnes each, with

read more

Contacts and information

Social networks

Most popular categories

Legal Notice

© 2012 BEARING NEWS All rights reserved.